Permacel/Nitto Denko America
P271
***Discontinued*** Flatback Paper Electrical Tape
P271 is obsolete the alternate is 749BM. It is a 6.5 mil, flatback paper used for electronic component, reel packaging and sequencing tape. It is the most widely used, highest performance tape available for sequencing axial lead electronic components for automated machine assembly of circuit boards. P271 is also used extensively for reel packaging.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.5 Mils |
| Tensile | 45.00 lbs/in |
|---|---|
| Elongation | 3.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 70 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Promotes maintenance of component spacing
- Assures contour laydown of tape around component leads
- Excellent adhesive mass anchorage and mass-to-mass adhesion rigidly secure components
- Controlled unwind provides proper tension thru equipment guides
- Controlled close tolerance slitting & minimum roll weave insures trouble-free operation
- Available in spools up to 5,000 yards in length for efficient continuous operation
- Low level indicator signals when end of spool is near, permitting easy change-over to a new spool
- Outstanding aging properties permit long-term storage of reel packaged & sequenced components without tape delamination or movement of component
Adhesive Tape Applications
- Sequencing axial lead electronic components for automated machine assembly of circuit boards
- Reel packaging
- Continuous packaging of heat-shrink insulating tubes, wire connectors, etc. when used in automated installation equipment
Adhesive Tape Colors
- Blue
- Green
- Red
- White
- Yellow
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.