Permacel/Nitto Denko America
P423
2-Mil Bondable PTFE Film Tape
P423 is a 3.5 mil, bondable, PTFE film tape. It is the ideal tape where electrical varnishes and epoxy resins are used. The high adhesion to backing makes it ideal for use as continuously served harness wrap as base for resin coatings.
| Backing/Carrier | PTFE - Hi Modulous |
|---|---|
| Adhesive | Silicone |
| Thickness | 3.5 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 25 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Directly printable
- Interlined
- Excellent conformability
- Tough, high abrasion & tear resistance
- Adhesive & backing are compatible with silicone encapsulated transformers & reactors
- Cured silicone adhesive
- Cured silicone adhesive
- Outstanding bondability
- Unsurpassed dielectric strength for its thickness over widest range of temperatures
Adhesive Tape Applications
- Where electrical varnishes & epoxy resins are used
- Continuously served harness wrap
- Wrapping applications over small diameters
- Barrier insulation for wraps
- Ground & phase insulation
- Bundling end turns
- Insulating connections in small high frequency, fine wire wound resin encapsulated motors for aerospace service
Adhesive Tape Colors
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.