Permacel/Nitto Denko America
SOLDERMASK
Solder-Mask Circuit Board Masking Tape
Solder-Mask is an 8.2 mil, impregnated crepe paper, circuit board masking tape. It is designed for masking printed circuit board contact fingers and assembly holes prior to wave soldering. Solder-Mask is an excellent choice for all wave soldering operations.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Silicone |
| Thickness | 8.2 Mils |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 8.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 45 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Stays firmly anchored to the circuit board thru the flux, pre-heat and solder stations
- Easily removed in one piece without leaving any residue
- Backing conforms precisely to the printed circuit design, protecting/masking gold fingers at solder temperatures
- Easily applied by hand or machine
- Unwind @ 150 FPM = 30 oz./in.
Adhesive Tape Applications
- Masking printed circuit board gold fingers during the wave soldering operation
- Can be interlined & die-cut and applied to a circuit board wherever a spot sold mask is required
Adhesive Tape Colors
- Tan
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.