Pregis
2105C
2 mil Polyethylene Surface Protection Tape
2105C polyethylene protective tape has a very low-tack adhesive system to help provide temporary protection of many polished metals, plastics, and glass materials with minimum adhesion build up and clean removability.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | 450.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 2 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Transparent backing
- Withstands most forming operations
- Non-staining & non-corrosive adhesive
- 2,500 psi/1.7 MPA break strength
Markets Served
- Aerospace
- Appliance
- Automotive
- Commercial printing
- Electronics
- Extruders of Plastic and Rubber
- Marine
- Recreational
Adhesive Tape Applications
- Automotive trim protection
- Sign & nameplate protection
- Molded plastic part protection
- Anodized aluminum protection
- CRT and LCD lens protection
- Appliance glass & panel protection
- Architectural panel & garage doors
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.