Pregis
25A26
2.5 mil Co-Extruded Polyethylene Protective Tape
25A26 is a 2.5 mil co-extruded protective tape featuring polyethylene backing with an acrylic adhesive that offers enhanced abrasion resistance for the protection of metals, plastics and glass. 25A26 tape offers excellent abrasion resistance to help protect aluminum, stainless sheets, coils and painted metals from surface damage, such as scratching, abrading, etc.. The enhanced elongation properties of the film allow the tape to be left on during many forming operations where damage may occur. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. The abrasion resistance testing was conducted using ASTM test method D4060 and a taber abrader employing a CS-10 wheel and 1000 grams of auxiliary weights.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 9 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- 2.5 mil. polyethylene backing
- Acrylic adhesive
- 180° peel adhesion to PSTC steel plate: 9.0oz./in.
- High elongation
- Greater abrasion resistance
- Thinner gauge backing
- Ease of application
- May be left on through forming without removing
- Allows more linear footage on a roll vs. typical thicker gauge films
- Reduces cost
- Reduces labor
- Reduces inventory
Adhesive Tape Applications
- Mill finished metals
- Flat finished painted metals
- Dull finished plastics
Adhesive Tape Colors
- Blue
- Clear
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.