Pregis
R0601 FO
Laser Cutting Protective Film
Temporary protective film is mainly used for the protection against mechanical damage, dirt, scratch, abrasion during storage, transportation and light manufacturing. This product is usable for LASER CUTTING process, can be used on Fiber Optic cutting Machine. Temporary surface protection film is not to be used for permanent protection, they should be removed as soon as possible and in any case immediately at the end of the supply chain.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 4 Mils |
| Tensile | 6.70 lbs/in |
|---|---|
| Elongation | 240.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 14.6 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Protection against mechanical damage, dirt, scratch, abrasion during storage, transportation and light manufacturing
- Suitable for Fiber Optic laser cutting
- Temporary surface protection
- This product is not suitable for copper and brass
Markets Served
- Aerospace
- Appliance
- Alternative wind energy
- Electronics
- Industrial
- Marine
- Medical Device
- Signage, Banners, & Printing
- Truck and trailer body
Adhesive Tape Applications
- Structured Metallic Surfaces
- Varnished Surfaces
- Powder Coated Metallic Surfaces
- Highgrade steel
- Stainless Steel
- This product is usable for LASER CUTTING process, can be used on Fiber Optic cutting Machine
Adhesive Tape Colors
- Black
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.