Saint-Gobain
A2005
PTFE Coated Fiberglass Fabric
CHR A2005 is a very durable and versatile product. The combination of PTFE, fibreglass and a high-temperature silicone adhesive allows A2005 to perform in continuous temperatures up to 260°C (500°F). A2005 is dimensionally stable and resistant to tears, punctures, abrasion and wear. It will not “cold flow” under heavy loads.
| Backing/Carrier | PTFE Coated Fiberglass |
|---|---|
| Adhesive | Silicone |
| Thickness | 5.5 Mils |
| Tensile | 90.00 lbs/in |
|---|---|
| Elongation | 5.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 0° F |
|---|---|
| Min. Service Temp | -100° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- Resistant to tears, punctures, abrasions, and wear
- Will not “cold flow” under heavy loads
- The combination of PTFE, fibreglass and a high temperature silicone adhesive allows A2005 to perform in continuous temperatures up to 260°C (500°F
Markets Served
- Aerospace
- Industrial
Adhesive Tape Applications
- CHR A2005 is frequently used by the packaging industry as a release surface on heat sealers, blister formation and form-fill-seal equipment. The durability and anti-stick properties of CHR A2005 also make it an ideal material for the lining of guide rails, chutes and slides. The high temperature capabilities and non-stick properties of CHR A2005 allow it to perform as an excellent release surface in the composite aircraft industry
Adhesive Tape Colors
- Natural
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.