Saint-Gobain
F-12
NORSEAL® Silicone Foam Rubber
Saint-Gobain NORSEAL® F-12 silicone foam combines unique flame retardancy and low toxic gas emission properties with excellent compression set resistance, conformity and low density. Combining two or all of these properties makes F-12 the ultimate fireblocking silicone foam for fire- and heat-resistant gaskets, seals and cushioning, as well as radiant heat shields and insulation blankets.
| Backing/Carrier | Siliconized Sponge |
|---|---|
| Adhesive | Acrylic |
| Thickness | 31.4 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 60.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -60° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 400° F |
Product Features
- Withstands 2100°F flame for 10 minutes
- Low levels of toxicity and smoke generation
- Excellent compression set resistance
- Lightweight
- Meets requirements of FDA extractables 21.CFR 177.2600 for food contact
- Can be cast onto various substrates, inlcuding heat shielding materials, tear-ressitant materials and vapor barriers
- Available as a pressure-sensitive adhesive tape under the NORSEAL Silicone SNS 512AF product line
Markets Served
- Aerospace
- Appliance
- Electronics
- Industrial
- Automotive
Adhesive Tape Applications
- Gasket seal for outdoor lighting
- Seat cushioning
- Medical equipment
- Electronic assembly
- Access panels seals for railcar applications
Adhesive Tape Colors
- Black
- Brown
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.