Saint-Gobain
V716
Single Coated Closed Cell Polyvinyl Chloride Foam
V716 is a 6/32" thick, single coated, closed cell PVC foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners. Norseal® V710 series.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 187.5 Mils |
| Tensile | |
|---|---|
| Elongation | 80.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 8 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -15° F |
| Max Short-Term Temp | 160° F |
| Max Long-Term Temp |
Product Features
- Special foam substrate resists distortion from drilling, riveting and other fastening operations
- Requires only 30% compression to seal against light, dust and water
- Density= 12#/cu.ft.
- Tensile=35PSI
- Thermal Conductivity=.3
- Delivers weather-resistant, long life sealing performance
- Conforms to curved or irregular surfaces
- Compression characteristics make it highly effective for sealing overlap joints
- Material is dimensionally stable. Will not ooze, drip, or slip while under compression
- Aggresive adhesive holds sealant in place during assembly operations
- Liner on the non-adhesive side makes handling easy
Adhesive Tape Applications
- Modular walls
- Corrugated panel and lap joint seal
- Cab roof line seal
- Die cut gaskets
- Vehicle overlap seals
- Metal farm building
- Outdoor lighting fixtures
- Railroad car/Marine use
Adhesive Tape Colors
- Black
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.