Saint-Gobain
V736
Single Coated, Closed Cell PVC
V736 is a 3/16" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals. Norseal® V730 series.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 187.5 Mils |
| Tensile | |
|---|---|
| Elongation | 140.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 16 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -15° F |
| Max Short-Term Temp | 160° F |
| Max Long-Term Temp | 160° F |
Product Features
- Available in gray
- Paper liner
- Rolls are dimensionally stable, will not ooze, drip or run under compression
- Tensile strength=15PSI
- Density=6#/cu. ft.
- Easy to radius, enhancing positive seal on curved surfaces
- Low thermal conductivity improves the energy efficiency of your structure
- Controls sound transmission & vibration. Ideal for acoustical partitions
- Low deflection force reduces distortion of adjacent material
- High tack positioning adhesive grips tight on initial contact, keeps foam in place during assembly
Adhesive Tape Applications
- Acoustical partitions
- Suspended ceilings
- Cold rooms
- Vending machines
- Culvert pipes
- Hot tubs
- Seals for flashing
- Saunas
- Battery cushion
- Computer cabinet dust & noise seal
- Roof top air conditioner insulation
- Dust seal on analytic equipment
Adhesive Tape Colors
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.