Saint-Gobain
V992
Double Coated Closed Cell Polyvinyl Chloride
V992 is a 63 mil thick, closed cell Polyvinyl Chloride with acrylic adhesive on both sides. It is excellent for glazing of joints with high movement such as marine and architectural glass. V992 is a good choice to seal out water, dust and light, and due to its excellent resistance to weathering, oxidation and ultraviolet exposure, it produces a long-life seal. Norseal® V990 series.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 63 Mils |
| Tensile | |
|---|---|
| Elongation | 180.00% |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 45° F |
|---|---|
| Min. Service Temp | -30° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp |
Product Features
- Available in white as V992 WH
- Exceeds requirements of AAMA 810.1 specification
- Compatible with most glazing components
- Excellent die cutting due to high shore hardness
- Peel Adhesion=9.5#/in
- Density=15#/cu.ft.
- Water Penetration=1%
- Pump test=Pass
- Tensile Adhesion=9.5#/in.
- When properly sized, seals effectively without shimming
- Provides uniform sight lines without hand tooling, oozing or cold flow of sealant
Adhesive Tape Applications
- Exterior glazing sealant for metal, wood and vinyl sash systems
- Heating and ventilation duct systems
- Commercial refrigeration glazing
- Vibration dampening
- Marine glazing
- Low stress mounting
- Die cut gaskets
Adhesive Tape Colors
- Black
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.