Scapa Tapes North America
RX132P
Single Coated Medical Pressure Sensitive Tape
Bioflexr RX132P is a 2.5 mil, single coated medical pressure sensitive tape. It is primarily used as medical device fabrication and specialty bandages. The adhesive used in RX132P is an acrylic polymer that has been tested by an independent medical laboratory. Copies of the test procedures are available on request. This adhesive also carries a Device Master File Number at the Bureau of Medical Devices of the Food and Drug Administration. We welcome any further inquiries you might have concerning the use of this product. In all cases, however, the burden of determining the suitability of this product for a medical device falls on the manufacturer or processor of the medical device.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 42 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- White pearlized film is printable
- Medical grade acrylic adhesive holds Master Device File Number with the Bureau of Medical Devices
- Acrylic adhesive system offers excellent quick stick
- Color of adhesive is clear
- Hodling power: (PSTC Method #7 Mod./178°) 2.2 psi (1"x1"x1000g) @ RT = 23 hours
- Product Safety:
- Draize skin irritation - passed
- Cytotoxicity - passed
- Bovine spongiform encephalopathy (BSE) - passed
- Adhesive is approved for indirect food contact (21CFR175.105 adhesives)
- Contains no natural latex proteins
Adhesive Tape Applications
- Medical device fabrication
- Specialty bandages
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.