Scapa Tapes North America
UA10
Unsupported Pressure Sensitive Adhesive Films
Unifilmr UA10 is a 1 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication, and general bonding and mounting.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 1 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 110 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Adhesive film laminates well to a variety of substrates
- Performs well over a wide temperature range and offers high peel strength
- Adhesive is clear and has excellent UV resistance, and humidity resistance
- Peel adhesion to stainless steel (PSTC 1 Mod./180°); 20 min. @ RT = 50 oz/in
- Holding power (PSTC 7 Mod./178°) 2.2 psi (1x1x1000g) @ RT = >100 hours
- Heat resistance (PSTC 7 Mod./178°) 1.1 psi (1x1x500g) @ 158°F (70°C) = >65 hours
- Humidity resistance % peel retention after 1 wk. @ 100°F (38°C)/100% RH = 92%
- Water resistance % peel retention after 24 hour soak = 97%
Adhesive Tape Applications
- Nameplates, faceplates, membrane switch fabrication
- Application of decorative parts
- General bonding and mounting
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.