Scapa Tapes North America
UJ50
Unsupported Pressure Sensitive Adhesive Films
Unifilmr UJ50 is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, lamination to foam for gasketing and sound control and application of decorative parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 109 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp |
Product Features
- High humidity resistance
- High cohesive strength provides resistance to creep
- Performs well over a wide temperature range
- Peel adhesion (PSTC 1 Mod./180°) to ABS Plastic: 20 min. @ RT = 102 oz/in
- Holding Power (PSTC 7 Mod./178°) 4.4 psi (1/2x1x1000g) @ RT > 168 hrs.
- Heat resistance (PSTC 7 Mod./178°) 1.1 psi (1x1x500g) @ 158°F (70°C) > 168 hours
- Humidity resistance % peel retention after 1 wk. @ 100°F (38°C)/100% RH = 100%
- Water resistance % peel retention after 24 hour soak = 100%
Adhesive Tape Applications
- Nameplates
- Lamination to foam for gasketing and sound control
- Application of decorative parts
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.