Scapa Tapes North America
UP20
Unsupported Adhesive Transfer
Unifilmr UP20 is a 2.0 mil, unsupported adhesive transfer. It is primarily used for lamination to foam for gasketing and sound control, decorative parts and product assembly.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 150 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Ultra high anchorage to a variety of urethane foams
- Extremely high tack, quick stick, and peel strength
- Excellent humidity and water soak resistance
- Performs well over a wide temperature range
- Peel adhesion to stainless steel (PSTC 1 Mod./180°) 20 min. @ RT = 50 oz/in
- Holding power (PSTC 7 Mod./178°) 4.4 psi (1/2x1x1000g) @ RT = 15 hours
- Humidity resistance % peel retention after 1 wk. @ 100°F (38°C)/100% RH = 96%
- Water resistance % peel retention after 24 hour soak = 95%
- Release liner systems: No.1 --80# Bleached kraft (single liner)--Available upon request (double linered): No. 4--76# Bleached lay flat (single liner)--(Paper/Poly) (double linered): No. 9--81# Manila lay flat (single liner)
Adhesive Tape Applications
- Lamination to foam for gasketing and sound control
- Application of decorative parts and product assembly
- Product assembly
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.