tesa tape inc
51511 PV0
***Discontinued*** Light Tack Wafer Tape
***Discontinued by tesa *** 51511 PV0 is a 3.8 mil, polyolefin developed for the dicing process of silicone wafers. The adhesive is designed to firmly hold the wafer in place during the dicing operation, but still allows an easy pickup of the dies.
| Backing/Carrier | Polyolefin |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.8 Mils |
| Tensile | 9.80 lbs/in |
|---|---|
| Elongation | 400.00% |
| Adhesion (liner) | 2.7 oz/in |
| Adhesion (unwind) | 2.7 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Tensile Strength=MD: 17N/cm TD: 17N/cm
- Elongation=MD: 400%, TD; 400%
- Force required for 10% stretch: MD: 5.0 N/cm, 3 #/in, TD: 5.0 N/cm, 3 #/in
- Force required for 25%: MD: 6.0 N/cm, 3.5#/in
- Consistent tape thickness over the length of the roll
- no residue after pickup
- PVC free
- Even elongation in x and y axis
Adhesive Tape Applications
- Firmly holds silicone wafers in place for dicing operation
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.