tesa tape inc
75013
Low VOC Laminating Tape
esa® 75013 Low VOC Laminating Tape is a conformable, tackified acrylic adhesive tape with a thickness of 5 mils, reinforced by a PET scrim. This tape has especially been developed for all kinds of very demanding lamination and mounting applications. It shows a high humidity resistance and edge repulsion resistance. Due to its low VOC property, it is particularly designed to meet automotive interior requirements.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5.11 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 14.7 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 356° F |
| Max Long-Term Temp |
Product Features
- Highly conformable to follow difficult 3-D shapes
- Low VOC (acc. GB 27630) – no critical substances detectable
- Secure mounting even to nonpolar plastics (PP) and composites (recycled materials)
- Excellent initial adhesion to a wide variety of interior substrates
- Very good humidity resistance
- High initial tack and excellent repulsion resistance
- Reinforcement supports converting efficiency
Markets Served
- Appliance
- Automotive
- Signage, Banners, & Printing
- Medical Device
- Industrial
- Construction
- Commercial
Adhesive Tape Applications
- Mounting of light interior trims (plastics, LSE surfaces)
- FPC (flexible printed circuits) mounting
- Lamination of insulation materials
- Laminates for NVH (noise, vibration, and harshness) and BSR (buzz, squeak, and rattle) prevention
- Lamination of decorative fabrics
- Lamination of foam for HVAC (heating, ventilation, and air conditioning) seals
- Mounting of flooring systems
Adhesive Tape Colors
- Transparent
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.