Budnick Converting ®
3M
222
***Discontinued*** Fine Line Masking
Discontinued 3M masking tape 222 is a 2.4mil high temperature, very thin, film tape for the most critical paint breaklines, leaving an extremely low paint ridge. Performs well and removes cleanly with virtually all paint systems.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.4 Mils |
| Tensile | 26.00 lbs/in |
|---|---|
| Elongation | 127.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 24 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 325° F |
| Max Long-Term Temp |
Product Features
- Very thin polyester tape
- High tack
- Thinness allows for extremely sharp paint line
- Removes with clean paint breakthrough, which helps save labor
- Smooth backing allows taping over fresh paint jobs sooner with reduced chance of imprint damage
- resists paint seepage
Adhesive Tape Applications
- Ideal for paint masking where an extremely sharp two-tone paint breakline is needed
- can be die-cut to help mask contours
- performs well with virtually all paint systems
- not suited for long-term outdoor exposure
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.