Budnick Converting ®
3M
2460
Ultimate Paint Edge Masking Tape
3M Scotch® Ultimate Paint Edge Masking Tape 2460 uses a thin, yet strong, smooth flat back paper that when used for paint masking gives a sharp paint line with a low paint ridge. This backing simplifies the task of making long straight lines but still incorporates the easy of being torn by hand. The acrylic adhesive holds on contact to many surfaces, yet peels away smoothly and cleanly.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.3 Mils |
| Tensile | 18.00 lbs/in |
|---|---|
| Elongation | 6.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 8 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp |
Product Features
- Acrylic adhesive provides good instant adhesion that minimizes adhesion build over time
- Easy unwind from roll reduces worker fatigue when applying tape
- Resists lifting and curling due to the good holding power of the adhesive
- Holds well to 3M gross masking papers, films, and bags to protect from paint overspray
- Dispenses well on 3M gross masking dispoenser machines
- Distinctive yellow color backing makes it easy to identify what tape is being used
- Translucent backing aids in seeing when the tape has been properly rubbed down to give best paint line
- Solvent and moisture resistant to provide paint bleed through resistance in application
- Tears easily by hand to reduce waste and provide ease of application and handling
- Saturated flat back paper backing proivdes strength for easy handling and application
Markets Served
- Construction
- Industrial
Adhesive Tape Colors
- Yellow
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.