Budnick Converting ®
3M
3302
Electrically Conductive Aluminum Tape
3M™ Electrically Conductive Aluminum Tape 3302 is a 2.0 mil (50 micron) high strength dead soft aluminum foil coated with specially formulated conductive pressure sensitive acrylic adhesive system. Good adhesion, malleability and adhesive conductivity allow for extremely low resistance and make this an excellent shielding tape. Designed to meet a wide variety of EMI and RFI shielding applications in the electronics industry. Also for use in printed circuit manufacture and repair. (Venture 1688)
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Aluminum |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | 1.80 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 225° F |
Product Features
- UL 510 Listed
- Malleable aluminum foil conforms well to irregular contours
- Ideal for EMI and RFI shielding applications
- Good "wetting out" capabilities to most surfaces
- Resists flame, resists moisture, resists weather, resists UV degradation, chemical resistant tape, thermally conductive tape for heating and cooling efficiency, heat reflective tape, light reflective tape, conformable tape
Markets Served
- Automotive
- Industrial
- Construction
- Aerospace
- Appliance
Adhesive Tape Applications
- EMI and RFI shielding
- Static discharge applications
Adhesive Tape Colors
- Silver
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.