Budnick Converting ®
3M
394
Vent Tape
394 is a 4mil, non-woven synthetic backing tape with a special low tack adhesive, primarily used for foam-in-place insulation processes in appliance and other industries. It contains fungicide for use in areas of high humidity.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | 6.00 lbs/in |
|---|---|
| Elongation | 18.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 12 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Backing=non-woven fabric
- Porosity=10.5sec/100cc air/1in²
- Needs to by stored in a clean,dry enviroment between 60-80°F and 40-50% relative humidity
- Contains fungicide for use in areas of high humidity
- Unique non-woven porous backing
- High air/gas permeability
- Minimal foam voids
- Good burst strength and solids barrier
- Less clean up
- Pressure-sensitive
- No additional holding means required
- Helps reduce labor costs
Adhesive Tape Applications
- Meets most typical outgassing requirements for foam-in-place insulation processes in appliance and other industries
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.