Budnick Converting ®
3M
400
***Discontinued*** Double Coated Paper Tape
DISCONTINUED REPLACED BY 410B A 5.0 mil. double coated rubber tape with 850 paper adhesive.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 50 oz/in |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 150° F |
Product Features
- 850 (R-50) rubber adhesive
- 3.0 mil. paper liner
- Appropriate application equipment: table top - P52, P56 and M712 pull and cut dispenser/ M87 and M96 definite length dispenser; semi automatic - S265 applicator/ T646i and T646Wi application system
- Excellent balance of high initial adhesion
- Good holding power
- Liner can be skip-slit which makes start-up easier
Adhesive Tape Applications
- Splicing and core starting of papers, foils, films, fabrics, etc.
- Mounting rubber or photopolymer printing plates to print cylinders
- Attaching golf club grips
- Temporary holding while parts are being finished in the milling process
Adhesive Tape Colors
- Cream
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.