Budnick Converting ®
3M
468
***Discontinued*** Laminating Adhesive
Discontinued item is replaced by 468MP, 468MPF, 468MPR. A 5.0 mil. laminating tape featuring #200 high-performace acrylic adhesive on a densified kraft liner used for nameplates, general purpose and decorative plates. When applied properly, 467 tape will hold securely after exposure to numerous chemicals including gasoline, MEK, oil, Freon TF, sodium chloride solution, mild acids and alkalis.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 158 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp | 250° F |
Product Features
- 5.0 mil. #200 acrylic adhesive
- 3.8 mil. paper liner
- Excellent bond
- Low leachable chloride and low outgassing
- 90° peel adhesion to polycarbonate: 73oz./in.
- Excellent bond to metal and high surface energy plastics (e.g. ABS, polycarbonate)
- Densified kraft liner for minimum edge burr when processing metal nameplates
- Densified kraft liner for rotary die-cutting of plastic nameplates
- Low leachable chloride and low outgassing are useful for adhesive application in the hard disk drive area
- Resistant to high humidity, water and UV exposure
- Bond strength increases as a function of time and temperature
Adhesive Tape Applications
- Metal nameplates for the appliance or electronic industries
- Excellent general purpose bonding in the industrial market
- Used for nameplates and decorative plates produced on roll to roll rotary die cutting process
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.