Budnick Converting ®
3M
5314
***Discontinued*** 30 mil Gray Acrylic Foam Tape
Discontinued 5314 acrylic foam tape is a gray, double-coated acrylic foam tape. It is a medium density foam tape providing a balance of conformabiltiy and strength. The acrylic foam core has unique viscoelastic properties that allow it to elongate and relax when put under load, thereby minimizing stress on the adhesive bond line. AFT 5314 has AR -7 adhesive on the liner side of the product for bonding to automotive paint surfaces. DS-4 adhesive is used on the non-liner side of this product for bonding to the exterior trim part.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Acrylic Foam |
|---|---|
| Adhesive | Acrylic |
| Thickness | 30 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Gray Acrylic Foam Tape
- Double-coated
- AR-7 Adhesive on the liner side
- DS-4 adhesive on the non-liner side
- Breakaway peel is 20#/.5" after 72 hrs. at 72°
- Density =43#/ft3 +/- 5#/ft3
- Medium density foam tape provides a balance of conformability and strength
- Acrylic foam core has unique viscoelastic properties that allow it to elongate and relax when put under load, thereby minimizing stress on the adhesive bond line
Adhesive Tape Applications
- Attachment of automotive exterior trim parts
- Attachment of door edge moldings & roof slats
- Mounts thin or flexible name plates
Adhesive Tape Colors
- Gray
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.