Budnick Converting ®
3M
8415
***Discontinued*** Polyester Film Tape
DISCONTINUED PRODUCT, 3M RECOMMENDS 8411 AS AN ALTERNATE A 1.5 mil. self-wound (linerless) transparent polyester film coated with #400 high tack acrylic adhesive.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 1.5 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 18 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Adheres instantly to a variety of surfaces
- Tough film backing resists edge tear when processing and dispensing
- Non-corrosive and chemical resistant
- High and low temperature stability
- Printable with common processes and inks
- Provides good transparency when used as an overlaminate
- 180° peel adhesion to glass = 18 oz./in.
- 180° peel adhesion to polypropylene = 13 oz./in.
- 180° peel adhesion to ABS = 20 oz./in.
- Printing - compatable with flexographic processes and modified inks
- Dispensing - suitable for dispensing by manual or automatic dispensing systems or by hand
- Chemical resistance = no change at 4 hour immersions at room conditions, 2" x 2" sample on stainless steel substrate: Isopropyl Alcohol, 10W30 Oil, Acid (pH 4), Base (pH 10) and Water
Adhesive Tape Applications
- Excellent for protecting labels
Adhesive Tape Colors
- Clear
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.