Budnick Converting ®
3M
8810
Thermally Conductive Adhesive Transfer
3M 8810 is designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices such as fans, heat spreaders, or heat pipes.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 10 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Tacky pressure sensitive adhesives loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates
- The specialized chemistry renders them modestly soft and able to wet to many surfaces, allowing them to conform well to non-flat surfaces, provide high adhesion, and act as a good thermal interface
- The specialized acrylic chemistry provides for excellent thermal stability of the base polymer
- Provided on a silicone treated polyester release liner for ease of handling and die-cutting
- Offer excellent adhesive performance with good wetting and flow onto many substrate surfaces
- Good thermal conductivity and electrical insulation properties
Markets Served
- Electronics
Adhesive Tape Applications
- Designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices
- LED lighting attachment
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.