Budnick Converting ®
3M
891
***Discontinued***Filament Tape
A**Discontinued**n 8.0 mil. high performance transparent packaging tape reinforced with continuous glass yarn filaments, which give the tape high tensile strength.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 8 Mils |
| Tensile | 380.00 lbs/in |
|---|---|
| Elongation | 3.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 55 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Pressure-sensitive adhesive
- Scotchpar™ backing
- Glass reinforcement
- Heavy adhesive coating with balanced characteristics
- Resistant to: abrasion and moisture
- Good handling
- Printable by the print seal process
- High tensile strength
- High shear strength
- Excellent initial adhesion
- Excellent aging
- Good protection of filaments and adhesive to provide longer package life
- Assures maximum package performance for limited outdoor use
- Saves time through ease of dispensing and handling versus glues and strapping
- Good handling under a wide range of application conditions with minimum amount of tape
- Reduced case closure failures
Adhesive Tape Applications
- Hand held dispensers and an automatic L-Clip applicator is available
- Application is most easily accomplished at room temperature
- Lower temperatures, approaching 32°F, the adhesive becomes firm
- Once applied, the tape performs well throughout the normal temperature ranges encountered by packaged products in shipping and storage environments
Adhesive Tape Colors
- Clear
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.