Budnick Converting ®
3M
910
Repulpable Single Coated Splicing Tape
910 is a 4mil single-coated repulpable splicing tape, using a release coated, semi-bleached kraft paper backing and a blue, high performance adhesive. Designed for splicing of light weight coated papers, particularly gravure papers. It can also be used in many other finished splice applications, even with alkaline coatings and stearate sizing.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | |
| Thickness | 4 Mils |
| Tensile | 45.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- Adhesive is blue and completly repulpable
- Backing is a semi bleached kraft paper (52#/3000ft sq)
- Combines high initial adhesion with very good heat resistance to perform on the difficult surface of raw light weight coated papers
- Good, high-strength, splices quickly
- Performs through many high temperature operations, including super-calendering and printing.
Adhesive Tape Applications
- Taping to the "lip" on the web offset splices and the "lip" and "tail" on safety splices
- Butt splices
- Paster tabs
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.