Budnick Converting ®
3M
921XL
***Discontinued*** Adhesive Transfer Tape
Discontinued A 1.0 mil. transfer tape with A-70 acrylic adhesive primarily used for mounting and joining applications. A-70 is a soft pressure-sensitive acrylic adhesive system. If also features low initial adhesion to paper and many other materials with minimal bond build up. 921XL also consists of an extended liner (XL), that extends beyond the width of the adhesive to provide easy liner starting and removal. The liner extension provides a dry edge on each side of the tape for easy removal, however, this decreases the adhesive coating by 1/8in. overall. The liner is printed with the message, "Remove to Expose Adhesive".
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 1 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 20 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 150° F |
Product Features
- 1.0 mil. A-70 acrylic adhesive
- 2.5 mil. white paper liner
- Liner extension: 1/16in.
- Low initial adhesion
- Good shear holding power
- Easy liner starting ane removal
- Extended liner
Adhesive Tape Applications
- Mounting and joining where repositionability may be desired
Adhesive Tape Colors
- Clear
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.