Budnick Converting ®
3M
9472FL
Adhesive Transfer Tape
3M 9472FL is 5.0 mil 300LSE low surface energy acrylic adhesive on a 2.0 mil polyester film liner. It is engineered for reliable adhesion
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 100 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 200° F |
Product Features
- A 5 mil version of 9471LE
- Ideal as a film liner
- Good chemical and moisture resistance
- Thick adhesive (5 mil) assures positive bonding to textured LSE plastics, powder coatings and oily metals
- PET film liner resists breakage for one piece liner removal
- High initial adhesion
Markets Served
- Commercial printing
- Appliance
- Signage, Banners, & Printing
- Industrial
Adhesive Tape Applications
- Plastic nameplates or graphic overlays on low surface energy plastics
- Waste removed nameplates on a common sheet for ease of application
- Attaching membrane switch assemblies to powder coated surfaces and low surface energy plastics
- Graphic overlays with end tabs for easy liner removal
- Graphic application to surfaces such as wood, fabric and plastic, where very high bond strength is required
- Attaching indentification material to lightly oily surfaces typical of machine parts
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.