Budnick Converting ®
3M
965
High Temperature Adhesive Transfer Tape
A 2.3 mil. transfer tape that uses 100 adhesive designed for temperature exposure to 40°F (232°C) for short periods of time and/ or solvent reistant. Bond strength increases as a function of time and temperatrue.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 116 oz/in |
| Min. Application Temp | -40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 450° F |
| Max Long-Term Temp | 300° F |
Product Features
- 90° peel adhesion to ABS = 45 oz./in. (ASTM D3330)
- Static shear on stainless steel at room temperature = 2000 gms. for 10,000 min.
- Static shear on stainless steel at 158%deg;F = 1000 gms. for 10,000 min.
- Static shear on stainless steel at 200°F = 1000 gms. for 10,000 min.
- Immersion in water has no effect on bond strength
- When properly applied, nameplates and decorative trim parts are not effected by outdoor exposure, and will hold securely after exposure to numerous chemicals including gasoline, oil, Freon™TF, sodium chloride solution, mild acids and alkalis
- Outstanding temperature and chemical resistance
- 965 Adhesive Transfer Tape was designed to hold up against Aviation Turbine Fuel, Grade JP-4, which usually attacks many of the best adhesives withing 72 hours
- Exceptional shear values at elevated temperatures
- Offer low "outgassing" properties associated with aerospace, automotive and electronic industries
- Different liners for a variety of die-cutting applications
- Modified 100 adhesive to provide excellent resistance to jet fuel and other chemicals for identification lables on aircraft
- High humidity has a minimal effect on adhesive performance
- Excellent bond to metal and high surface energy plastics
Adhesive Tape Applications
- Bond strength improves with firm application pressure and moderate heat (for metal surfaces only)
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.