Budnick Converting ®
3M
9676MP
***Discontinued*** Laminating Adhesive
Discontinued A 2.0 mil. double linered, laminating tape with #200 acrylic adhesive used for embossing, bonding and graphics. The bond strength can be improved with firm application pressure and moderate heat causing the adhesive to develop intimate contact with the bonding surface. 9676MP tape offers excellent die cuttability in processing. For improved processing, lubricate dies with vanishing oil or similar low residue lubricants. This tape also offers excellent processability when roll laminating. A combination of metal and rubber rollers with moderate pressure is recommended.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 113 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 300° F |
Product Features
- #200MP acrylic adhesive
- Double linered
- Polypropylene liner conforms during embossing yet die cuts cleanly
- High performance acrylic adhesive provides exceptional environmental resistance and enhanced bond strength
- Superior adhesive smoothness offers improved clarity and lamination to thin plastic facestocks
- High cohesive strength provides resistance to edge lifting and slippage
- Moisture stable liner resists curling or wrinkling in high humidity
- Bond strength increases as a function of time and temperature
- High humidity has minimal effect on adhesive performance
- Not effected by UV exposure or immersion in water
- Resistant to numerous chemicals including gasoline, oil, Freon™ TF, sodium chloride solution, mild acids and alkalis
- Resistant to heat up to 400°F
Adhesive Tape Applications
- Embossed metal or plastic nameplates and graphic overlays
- Long term bonding of nameplates and decorative trim to metal and high surface energy plastics
- Embossed graphic panels in the assembly of membrane switches
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.