Budnick Converting ®
3M
9692
***Discontinued*** Adhesive Transfer Tape
Discontinued An 2.0 mil. adhesive transfer tape that consists of 300MP hi-strength acrylic adhesive on a polycoated kraft liner ideally suited for bonding foam, fabrics, or other textured surfaces. 9692 tape has excellent flowability which helps with application. Acrylic adhesive is very smooth and suitable for bonding to most surfaces, including low surface energy plastics. Liner improves lay-flat processing of plastic graphic overlays and foam lubricated parts along with die cutting of end tabs and multiple parts on a common carrier.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 46 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 150° F |
Product Features
- 2.0 mil. 300MP acrylic adhesive
- 90° peel adhesion to aluminum: 55 oz./in.
- 90° peel adhesion to polycarbonate: 48 oz./in.
- 90° peel adhesion to polypropylene: 29 oz./in.
- Very high initial adhesion
- High humidity has minimal effect on adhesive performance
- Bond strength increases as a function of time and temperature
- Resistant to immersion in water and high temperatures
- Adhesive will hold securely after exposure to numerous chemicals including oil, mild acids and alkalis
Adhesive Tape Applications
- Fabricated foam parts to contoured surfaces
- Plastic nameplates or graphic overlays for use on low surface energy plastics (LSE)
- Multiple die cut parts on a common sheet for ease of application
- Fabricated parts with end tabs for easy liner removal
- Graphic or fabricated parts to surfaces such as wood, fabric, plastic, rubber and textrued materials
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.