Budnick Converting ®
3M
9707
Electrically Conductive Adhesive Transfer Tape
3M™ Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA) transfer tape with isotropic electrical conductivity. The PSA matrix is filled with conductive fillers that allow interconnection between substrates through the adhesive thickness (the “Z-axis”) and also provides electrical conductivity in the plane of the adhesive (“X-Y Axis”). 3M ECATT 9707 and 9707K are ECATT products produced at different manufacturing locations. 3M ECATT 9707 and 9707K use similar base material types, however the ratios were adjusted slightly to achieve desired manufacturing specification performance results as determined by 3M test metho
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 55 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp | 158° F |
Product Features
- Can offer lower contact resistance to hard surfaces or surfaces with oxide layers, such as to stainless steel as compared to 3M ECATT 9709
- Can be applied as die cut parts or in roll form
- Good XYZ electrical conductivity performance with good adhesion
- Room temperature application and assembly
- Inherent EMI shielding capability can enhance existing shielding solutions, offer new design options and improve Faraday cage designs
- Provides an electrical connection and adhesively bonds EMI/RFI shields and gaskets to metal frames and enclosures
- Low contact resistance and tape construction for good EMI performance
- Electrical resistance through Z-axis O (3M ETM-12) = 0.03 O
- Electrical Resistance through XY-axis O (3M ETM-7) = 20~80 O
Markets Served
- Aerospace
- Appliance
- Automotive
- Electronics
- Medical Device
Adhesive Tape Applications
- EMI/RFI shield and gasket attachment applications, and grounding applications
- Larger Z-axis connections when die cut for each Z-axis connection
- EMI shields for displays
- Gasket attachment to EMI/RFI cabinets and enclosures
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.