Budnick Converting ®
3M
9817
***Discontinued*** Double-Coated Polyester Tape
**Discontinued**9817 is a 3.3 mil, polyester film used in the lamination to most open cell urethane and closed cell urethane foams. It provides a balance of peel and shear properties with good heat resistance and it bonds wll to polyester, polyester urethane, polyethylene, polystyrene, vinyl foams and most rubbers. It is available as 9817L, 9817M and 9817H depending on what liner is used.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 60 oz/in |
| Adhesion (unwind) | 60 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 40° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Static Shear with 1000 grams at room temperature are 10,000 minutes to fail
- Dynamic Peel to Polypropylene is 21 oz./in. or Neoprene is 96 oz/in
- Available as 9817L (60# Kraft liner), 9817M (74# Kraft liner) and 9817H (14 pt board liner)
- Heat resistance Acrylic = 220°F, Rubber = 175°F
- Extremely high-bond strength to most surfaces
- Excellent versatility for lamination to foam material
- Excellent dimensional stability with polyester carrier
- Densified kraft liner for rotary die-cutting
- Good rotary die-cutting characteristics from the super calendared kraft liner
- Use where high heat or UV resistance is not required
Adhesive Tape Applications
- General purpose foam or rubber laminating
- General purpose lamination of fabricated parts
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.