Budnick Converting ®
3M
9966
***Discontinued*** Single-Coated Splicing Tape
Discontinued A 4.5 mil. tape featuring flat back paper backing and clear repulpable adhesive primarily used for butt splicing and taping down edges securely. The paper kraft backing of this product is untreated and readily accepts inks and coatings for printing. The water solubility and alkali dispersability of 9966 tape are excellent and help prevent the contamination of the paper mill broke with non-repulpable material. The tape and liner of 9966 are compelety repulpable for easier use. Beware of the bonding strength which delaminates most papers.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | |
| Thickness | 4.5 Mils |
| Tensile | 22.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- Flat backed, dark blue backing
- Clear, repulpable adhesive
- Tensile strength (cross direction): 13lbs./ in.
- Excellent heat resistance to 400°F
- Printable backing accepts most printing ink and/ or coatings
- Excellent moisture stability under a variety of humidity and temperature conditions
- High initial adhesion
- Good heat resistance
- Repulability splices and tape will not contaminate broke
- Good, quick splices
- High strength splices
- Saves labor
- Increases value of scrap
- Assures high quality printing and coating
- No flaking or print distortion (not possible with silicone coated backings)
- Individual tape roll in plastic packaging is not required
Adhesive Tape Applications
- Butt splices
- Taping the leading and trailing edge
- Taping the leading edges on web offset splices and the leading and trailing edges on safety splices
- Performs through high temperature and pressure operations, including supercalendering and printing
Adhesive Tape Colors
- Blue
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.