Budnick Converting ®
Adchem Corp. / Berry Plastics
8500P
AdMount Decal
8500P is a 7.4 mil, double coated, polypropylene used for print brightening and permanent bonds to the most common types of laminating boards. The unwind side uses acrylic adhesive and liner side uses rubber adhesive.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 7.4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 80 oz/in |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Unwind side Static Shear: 1"^2x500 168 hours
- Liner side Static Shear: 1"^2x1000 168 hours
- High gloss
- High tack
- Moderate shear
- Unique acrylic print adhesive matched to a rubber based mounting adhesive
- Gloss finished both sides providing a smooth mirror-like finish to the acrylic adhesive
- Stay-flat moisture resistant liners
- Excellent adhesion properties
- Excellent opacity and print brightness
Adhesive Tape Applications
- Print brightening
- Bonds to:
- Laminating boards including FOAM-X, FOAM-COR,-GATORFOAM, and SINTRA
- Other low energy surfaces
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.