Budnick Converting ®
Avery Dennison
0805
***Discontinued*** Single Coated Dead Soft Foil
Discontinued Avery Dennison Damping Foil is a 10mil, aluminum foil used for reducing resonate noise, vibration, and fatigue in structures. Custom adhesive can be recommended for constrained layer sound damping based on temperature range and sound frequency range of the end user's application.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Aluminum |
|---|---|
| Adhesive | Acrylic |
| Thickness | 15 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 125 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- A specially formulated damping adhesive
- Polyethylene coated kraft liner
- 90° Peel Adhesion is 12 in/min
- Loop Tack is 20 in/min
- Static Shear is >10,000 minutes to failure @ 72°F in a 1 inch area with 2.2# load
- Excellent damping properties
- Excellent tack and adhesion
- Excellent temperature resistance
- Excellent environment resistance
- Heavy, protective aluminum foil
Adhesive Tape Applications
- Excellent in reducing resonate noise, vibration and fatigue in structures
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.