Budnick Converting ®
Avery Dennison
0815
Single Coated Dead Soft Foil
DISCONTINUED FT 0815 is a 6.2 mil, single coated dead soft foil. It is primarily used as a moisture barrier in the manufacture of applicances. Specification #55864
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Aluminum |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 81 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 200° F |
Product Features
- Aggressive rubber-based adhesive
- Densified kraft release liner
- Static Shear: 2.2 lbs. load at 72° upon a .25" square area>20 minutes to failure
- Bonds well to a wide variety of substrates
- Provides strength and moisture barrier
Adhesive Tape Applications
- FT 0815 was designed for use as a moisture barrier in the manufacture of appliances
- ABS plastic
- Aluminum-anodized
- Corrugated box
- Fiberglass-molded
- Film polyetheylene (treated)
- Film-polypropylene (treated)
- Foam-polyester urethane
- Foam-polyethylene
- Ceramic
- Metal
- Polycarbonate (lexan®)
- Stainless
Adhesive Tape Colors
- Aluminum
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.