Budnick Converting ®
Avery Dennison
1139
***Discontinued*** Rubber Adhesive Transfer
**DISCONTINUED BY AVERY DENNISON**FT 1139 is a 4.0 mil, low fogging, rubber adhesive transfer. It is primarily used for interior flock applications requiring repositionability and high adhesion to low surface energy plastics. Bonds easily to most materials including foam. Specification #56531
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Rubber |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 112 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 350° F |
Product Features
- Low fogging rubber based adhesive
- Repositionable
- Good adhesion to low surface energy plastics
- 180° peel adhesion to ABS = 112
- 180° peel adhesion to polypropelene = 104
- Static Shear: 1,000 grams at 72° upon a 1" squared area>10,000 minutes to failure
- SAFT: 1,000 grams upon a 1" squared area=199°F at failure
- Adheres well to almost all automotive interior materials
- Low fogging to meet many OEM specs
- Low initial adhesion allows for parts to be repositioned during assembly
Adhesive Tape Applications
- Designed for interior flock applications requiring repositionability
- High adhesion to low surface energy plastics
- Bonds easily to most materials including foam
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.