Budnick Converting ®
Avery Dennison
1148
***Discontinued*** Acrylic Transfer Tape
Discontinued FT 1148 is a 5.0 mil, aggressive acrylic transfer tape. It features aggressive tack and adhesion properties and is used for lamination to a variety of difficult to bond to substrates. Specification #56112
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 110 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 175° F |
| Max Long-Term Temp | 120° F |
Product Features
- Speically formulated acrylic adhesive
- Densified kraft release liner
- Static Shear: 2.2 lbs. at 72° upon .25" squared area>10 minutes to failure
- Designed to provide excellent adhesion to low surface energy substrates
- 80# liner provided good die cutting characteristics
Adhesive Tape Applications
- FT 1148 features aggressive tack and adhesion properties and is suitable for lamination to a variety of difficult to bond to substrates
- ABS plastic
- Aluminum-anodized
- Cloth
- EPDM
- Foam-polyester urethane
- Foam polyethylene
- Foam-polystyrene
- Ceramic
- Metal
- Neoprane
- Polycarbonate (lexan®)
- PVC-mildly plasticized
- Rubber-extruded
- Stainless
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.