Budnick Converting ®
Avery Dennison
2453
***Discontinued*** Double Coated 20 mil Foam
**DISCONTINUED BY AVERY DENNISON**FM 2453 is a 23.6 mil, double coated foam. It is especially used for bonding automotive mirrors to mirror housings, where good adhesion, heat resistance and gap filling are important. Specification #56454
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 23.6 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 78 oz/in |
| Adhesion (unwind) | 78 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 200° F |
Product Features
- Very aggressive acrylic adhesive for strong, permanent bond
- Thick carrier for easy handling and converting
- Thin foam construction for excellent line-to-line fit
- 180° mirror Back = 78.4 oz per in. both sides
- 180° PPO/PPE Plastic = 73.6 oz. per in. both sides
- Static shear is 500 minutes to fail on a .25" area with a 10# load
- Excellent bond to almost any surface
- Good heat, humidity and solvent resistance
- Good for gap filling and bonding rigid materials
Adhesive Tape Applications
- Specifically designed for bonding automotive mirrors to mirror housings, where good adhesion, heat resistance and gap filling are important.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.