Budnick Converting ®
Avery Dennison
3012
2.3 mil High Temp Silicone Transfer
FT 3012 is a 2.3 mil silicone adhesive with a double liner. It is suited for applications where high heat and environmental resistance is important. Specification # 56981
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp | 450° F |
Product Features
- Excellent environmental and chemical resistance
- Moisture resistant liner
- Easy release, tear resistant liner
- Good heat and humidity resistance
- Good solvent resistance
- Excellent for room temperature laminations with high service temp capabilities
Adhesive Tape Applications
- Excellent die cutting and slitting properties
- Great for use in applications where heat and environmental resistance is important
- Silicone adhesive performs under high heat as a constrained layer damper
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.