Budnick Converting ®
Avery Dennison
333
Double Coated Polyester Film
FT 333 is a 4.7 mil, double coated polyester film. It is primarily used to bond to polyurethane foams, sponge rubber, metal and plastic parts. where high adhesion is required. Specification #46411
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4.7 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 80 oz/in |
| Adhesion (unwind) | 80 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 150° F |
Product Features
- Specially formulated acrylic adhesive
- Polyester carrier
- Densified kraft release liner
- Static Shear: 5.5 lbs. at 72°F upon 1" squared area>100 minutes to failure
- Good adhesion to polyurethane foams
- Resists mild plasticizers
- Stability in processing and die-cutting
Adhesive Tape Applications
- Designed to bond to polyurethane foams, sponge rubber, metal and plastic parts where high adhesion is required
- ABS plastic
- Aluminum-anodized
- EPDM
- Foam-polyester urethane
- Ceramic
- Metal
- Neoprene
- Polycarbonate (lexan®)
- Rubber-extruded
- Stainless
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.