Budnick Converting ®
Avery Dennison
7951X
Double Coated Scrim Tape
Avery Dennison™ FT 7951X is a 3.8 mil double coated scrim with a low VOC modified acrylic adhesive. It is designed for general purpose bonding (e.g. gaskets, sound deadening and insulation materials). Specification # 58293
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.8 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 112 oz/in |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Reinforced adhesive
- Low outgassing modified acrylic adhesive
- Polyester scrim reinforcement
- Super calendered kraft release liner
- Conformability along with good die cutting performance
- Solvent free adhesive with excellent foam bonding performance
- Conformability and resistance to stretching with good converting performance
- Dimensional stability and excellent water jet and die cutting performance
- Adhesion to ABS - 180° Peel - 88 oz/in
- Static shear is >10,000 minutes to fail when 1.1# is put on a 1" square area
Adhesive Tape Applications
- General purpose foam bonding (e.g. gaskets, sound deadening and insulation materials
- good for end uses involving critical temp performance (e.g. interior automotive trim, PU foams, felts, fabrics)
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.