Budnick Converting ®
Avery Dennison
8307
***Discontinued*** Differential Polyester Tape
Discontinued FT 8307 is a 3.4 mil, differential adhesive polyester tape. It is primarily used where clean removability after short periods of time is required. Bonding to substrates with low internal strength (e.g., paper, wall board) is not recommended. Specification #58021
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 55 oz/in |
| Adhesion (unwind) | 120 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 175° F |
| Max Long-Term Temp | 150° F |
Product Features
- Specially designed dual adhesive system
- Polyester carrier
- Densified kraft release liner
- Static Shear: Unwind side=5.5 lbs. at 72° upon a 1" squared area>250 minutes to failure
- Liner side=5.5 lbs. at 72° upon a 1"x1" square area>150+ minutes to failure
- Removable adhesive on one side, and a permanent adhesive on the other
- Excellent die-cutting and slitting characteristics
- Permanent adhesive is excellent for foam bonding
Adhesive Tape Applications
- Designed for use where clean removability after short periods of time is required. Bonding to substrates with low internal strength (e.g., paper, wall board) is not recommended
- ABS plastic
- Aluminum-anodized
- Corrugated box
- Fiberglass-molded
- Film-polyetheylene (treated)
- Film-polypropylene (treated)
- Foam polyester urethane
- Foam-polyether urethane
- Foam polyethylene
- Ceramic
- Metal
- Polycarbonate (lexan®)
- Stainless
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.