Budnick Converting ®
Avery Dennison
8708
***Discontinued*** Double Coated Polypropylene
Discontinued FT 8708 is a 11.0 mil, double coated polypropylene. It is primarily used for bonding automotive trim, while meeting OEM fogging requirements. The double coated construction provides for consistent lamination and performance on coarse materials and substrates. Specification #56222
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 11 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 99 oz/in |
| Adhesion (unwind) | 121 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 225° F |
| Max Long-Term Temp | 200° F |
Product Features
- Specially formulated low-fogging adhesive technology on both sides
- Thick construction
- Polypropylene film carrier
- Densified kraft release liner
- Static Shear: 1000 grams at 72° upon .25" square area>5,000 minutes to failure
- Meets OEM fogging requirements
- Thick construction bonds to rough or textured materials
- Double coated construction for consistent lamination to uneven or coarse material
Adhesive Tape Applications
- Specifically designed for bonding automotive trim, while meeting OEM fogging requirements
- Provides for consistent lamination and performance on coarse materials and substrates
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.