Budnick Converting ®
Avery Dennison
MED3044
Double Coated Polyethylene Film
MED 3044 consists of a 3 mil clear polyethylene film coated on both sides with a non-sensitizing acrylic pressure-sensitive adhesive. The adhesive is protected by a white, polyethylene coated kraft release liner. It conforms to curved areas of the body, doesn't irritate patient's skin, provides strength, flexibility in performance as well as flexibility during diecutting.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 57.6 oz/in |
| Adhesion (unwind) | 57.6 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Loop Tack= Unwind 70 grams/2" width and Liner= 120 grams/2" width
- Tensile strength= MD - 3000 psi, CD - 2600 psi
- Loop Tack = MD - 3600psi , CD - 2600psi
- Clear conformable film
- Does not irritate patient's skin
- Provides strength and flexibility during converting
Adhesive Tape Applications
- Designed for use in mounting medical and other devices to human skin for sustained periods
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.