Budnick Converting ®
Avery Dennison
MED 5575A
Single-cated, PU Film with PE Support
Vancive MED 5575A is a single-coated, soft, pliable, transparent polyurethane film with a polyethylene support and an acrylic adhesive. This product’s thin and conformable film offers a high degree of user comfort, while its transparency allows for wound or site visibility; and in some applications, it can act as a barrier to assist in decreasing the risk for bacterial infections.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4.6 Mils |
| Tensile | |
|---|---|
| Elongation | 375.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 25.6 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Breathable
- Transparent
- Thin and conformable
- Moisture resistant
- Bacterial barrier
- Die-cuttable
- Gamma and EtO sterilizable
Markets Served
- Medical Device
Adhesive Tape Applications
- It is suited for incise applications, wound care, IV securement and situations requiring high MVTR and sustained periods of wear
Adhesive Tape Colors
- Transparent
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.