Budnick Converting ®
Budnick Converting
BudSeal™
Foam-In-Place Sealing and Seaming Tape
BudSeal™ is a strong polypropylene, non-woven fabric with a rubber adhesive that is covered by a release liner. BudSeal™ has a solid PET laminate to prevent foam bleed through. It is very conformable and foam adheres well to the PP backing. BudSeal™ is specifically designed to cover holes and seams to keep foam contained within the cavity during foam-in-place injection. BudSeal™ is provided on a paper release liner and can be custom converted into rolls or butt cut parts on a roll.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Non-Woven |
|---|---|
| Adhesive | Rubber |
| Thickness | 20.6 Mils |
| Tensile | |
|---|---|
| Elongation | 80.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 124 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 175° F |
| Max Long-Term Temp | 150° F |
Product Features
- Conformable non-woven PP backing
- Full coverage rubber based adhesive
- Low permeability
- Foam adheres to PP backing
- Prevents foam from tunneling into sensitive areas
Markets Served
- Appliance
Adhesive Tape Applications
- Foam-in-place injection
- Hole covering
- Seaming between components
- Protecting coils & other sensitive parts
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.